×
点此以英语 使用 ShareLaTeX

[edit] ShareLaTeX guides

[edit] LaTeX Basics

[edit] Mathematics

[edit] Figures and tables

[edit] References and Citations

[edit] Languages

[edit] Document structure

[edit] Formatting

[edit] Fonts

[edit] Presentations

[edit] Commands

[edit] Field specific

[edit] Class files

The pgfplots package is a powerful tool, based on tikz, dedicated to create scientific graphs.

Contents

[edit] Introduction

Pgfplots is a visualization tool to make simpler the inclusion of plots in your documents. The basic idea is that you provide the input data/formula and pgfplots does the rest.

\begin{tikzpicture}
\begin{axis}
\addplot[color=red]{exp(x)};
\end{axis}
\end{tikzpicture}
%Here ends the furst plot
\hskip 5pt
%Here begins the 3d plot
\begin{tikzpicture}
\begin{axis}
\addplot3[
    surf,
]
{exp(-x^2-y^2)*x};
\end{axis}
\end{tikzpicture}

Pgfplots3.png

Since pgfplot is based on tikz the plot must be inside a tikzpicture environment. Then the environment declaration \begin{axis}, \end{axis} will set the right scaling for the plot, check the Reference guide for other axis environments.

To add an actual plot, the command \addplot[color=red]{log(x)}; is used. Inside the squared brackets some options can be passed, in this case we set the colour of the plot to red; the squared brackets are mandatory, if no options are passed leave a blank space between them. Inside the curly brackets you put the function to plot. Is important to remember that this command must end with a semicolon ;.

To put a second plot next to the first one declare a new tikzpicture environment. Do not insert a new line, but a small blank gap, in this case hskip 10pt will insert a 10pt-wide blank space.

The rest of the syntax is the same, except for the \addplot3 [surf,]{exp(-x^2-y^2)*x};. This will add a 3dplot, and the option surf inside squared brackets declares that it's a surface plot. The function to plot must be placed inside curly brackets. Again, don't forget to put a semicolon ; at the end of the command.

Note: It's recommended as a good practice to indent the code - see the second plot in the example above - and to add a comma , at the end of each option passed to \addplot. This way the code is more readable and is easier to add further options if needed.

  Open an example of the pgfplots package in ShareLaTeX

[edit] The document preamble

To include pgfplots in your document is very easy, add the next line to your preamble and that's it:

\usepackage{pgfplots}

Some additional tweaking for this package can be made in the preamble. To change the size of each plot and also guarantee compatibility backwards (recommended) add the next line:

\pgfplotsset{width=10cm,compat=1.9}

This changes the size of each pgfplot figure to 10 cementers, which is huge; you may use different units (pt, mm, in). The compat parameter is for the code to work on the package version 1.9 or latter.

Since LaTeX was not initially conceived with plotting capabilities in mind, when there are several pgfplot figures in your document or they are very complex, it takes a considerable amount of time to render them. To improve the compiling time you can configure the package to export the figures to separate PDF files and then import them into the document, just add the code shown below to the preamble:

\usepgfplotslibrary{external}

\tikzexternalize

By now this functionality is not implemented in ShareLaTeX, but you can try it in your local LaTeX installation.

  Open an example of the pgfplots package in ShareLaTeX

[edit] 2D plots

Pgfplots 2D plotting functionalities are vast, you can personalize your plots to look exactly what you want. Nevertheless, the default options usually give very good result, so all you have to do is feed the data and LaTeX will do the rest:

[edit] Plotting mathematical expressions

To plot mathematical expressions is really easy:

\begin{tikzpicture}
\begin{axis}[
    axis lines = left,
    xlabel = $x$,
    ylabel = {$f(x)$},
]
%Below the red parabola is defined
\addplot [
    domain=-10:10, 
    samples=100, 
    color=red,
]
{x^2 - 2*x - 1};
\addlegendentry{$x^2 - 2x - 1$}
%Here the blue parabloa is defined
\addplot [
    domain=-10:10, 
    samples=100, 
    color=blue,
    ]
    {x^2 + 2*x + 1};
\addlegendentry{$x^2 + 2x + 1$}
 
\end{axis}
\end{tikzpicture}

Pgfplots4.png

Let's analyse the new commands line by line:

axis lines = left.
This will set the axis only on the left and bottom sides of the plot, instead of the default box. Further customisation options at the reference guide.
xlabel = $x$ and ylabel = {$f(x)$}.
Self-explanatory parameter names, these will let you put a label on the horizontal and vertical axis. Notice the ylabel value in between curly brackets, this brackets tell pgfplots how to group the text. The xlabel could have had brackets too. This is useful for complicated labels that may confuse pgfplot.
\addplot.
This will add a plot to the axis, general usage was described at the introduction. There are two new parameters in this example.
domain=-10:10.
This establishes the range of values of x.
samples=100.
Determines the number of points in the interval defined by domain. The greater the value of samples the sharper the graph you get, but it will take longer to render.
\addlegendentry{$x^2 - 2x - 1$}.
This adds the legend to identify the function x^2 - 2x - 1.

To add another graph to the plot just write a new \addplot entry.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Plotting from data

Scientific research often yields data that has to be analysed. The next example shows how to plot data with pgfplots:

\begin{tikzpicture}
\begin{axis}[
    title={Temperature dependence of CuSO$_4\cdot$5H$_2$O solubility},
    xlabel={Temperature [\textcelsius]},
    ylabel={Solubility [g per 100 g water]},
    xmin=0, xmax=100,
    ymin=0, ymax=120,
    xtick={0,20,40,60,80,100},
    ytick={0,20,40,60,80,100,120},
    legend pos=north west,
    ymajorgrids=true,
    grid style=dashed,
]
 
\addplot[
    color=blue,
    mark=square,
    ]
    coordinates {
    (0,23.1)(10,27.5)(20,32)(30,37.8)(40,44.6)(60,61.8)(80,83.8)(100,114)
    };
    \legend{CuSO$_4\cdot$5H$_2$O}
 
\end{axis}
\end{tikzpicture}

Pgfplots2.png


There are some new commands and parameters here:

title={Temperature dependence of CuSO$_4\cdot$5H$_2$O solubility}.
As you might expect, assigns a title to the figure. The title will be displayed above the plot.
xmin=0, xmax=100, ymin=0, ymax=120.
Minimum and maximum bounds of the x and y axes.
xtick={0,20,40,60,80,100}, ytick={0,20,40,60,80,100,120}.
Points where the marks are placed. If empty the ticks are set automatically.
legend pos=north west.
Position of the legend box. Check the reference guide for more options.
ymajorgrids=true.
This Enables/disables grid lines at the tick positions on the y axis. Use xmajorgrids to enable grid lines on the x axis.
grid style=dashed.
Self-explanatory. To display dashed grid lines.
mark=square.
This draws a squared mark at each point in the cordinates array. Each mark will be connected with the next one by a straight line.
coordinates {(0,23.1)(10,27.5)(20,32)...}
Coordinates of the points to be plotted. This is the data you want analyse graphically.

If the data is in a file, which is the case most of the time; instead of the commands \addplot and coordinates you should use \addplot table {file_with_the_data.dat}, the rest of the options are valid in this environment.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Scatter plots

Scatter plots are used to represent information by using some kind of marks, these are common, for example, when computing statistical regression. Lets start with some data, the sample below is to show the structure of the data file we are going to plot (see the end of this section for a link to the LaTeX source and the data file):

GPA ma ve co un

3.45 643 589 3.76 3.52

2.78 558 512 2.87 2.91

2.52 583 503 2.54 2.4

3.67 685 602 3.83 3.47

3.24 592 538 3.29 3.47

2.1 562 486 2.64 2.37

The next example is a scatter plot of the first two columns in this table:

\begin{tikzpicture}
\begin{axis}[
    enlargelimits=false,
]
\addplot+[
    only marks,
    scatter,
    mark=halfcircle*,
    mark size=2.9pt]
table[meta=ma]
{scattered_example.dat};
\end{axis}
\end{tikzpicture}

Scattered.png

The parameters passed to the axis and addplot environments can also be used in a data plot, except for scatter. Below the description of the code:

enlarge limits=false
This will shrink the axes so the point with maximum and minimum values lay on the edge of the plot.
only marks
Really explicit, will put a mark on each point.
scatter
When scatter is used the points are coloured depending on a value, the colour is given by the meta parameter explained below.
mark=halfcircle*
The kind of mark to use on each point, check the reference guide for a list of possible values.
mark size=2.9pt
The size of each mark, different units can be used.
table[meta=ma]{scattered_example.dat};
Here the table command tells latex that the data to be plotted is in a file. The meta=ma parameter is passed to choose the column that determines the colour of each point. Inside curly brackets is the name of the data file.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Bar graphs

Bar graphs (also known as bar charts and bar plots) are used to display gathered data, mainly statistical data about a population of some sort. Bar plots in pgfplots are highly customisable, but here we are going to show an example that 'just works':

\begin{tikzpicture}
\begin{axis}[
	x tick label style={
		/pgf/number format/1000 sep=},
	ylabel=Year,
	enlargelimits=0.05,
	legend style={at={(0.5,-0.1)},
	anchor=north,legend columns=-1},
	ybar interval=0.7,
]
\addplot 
	coordinates {(2012,408184) (2011,408348)
		 (2010,414870) (2009,412156)};
\addplot 
	coordinates {(2012,388950) (2011,393007) 
		(2010,398449) (2009,395972)};
\legend{Men,Women}
\end{axis}
\end{tikzpicture}

Pop.png

The figure starts with the already explained declaration of the tikzpicture and axis environments, but the axis declaration has a number of new parameters:

x tick label style={/pgf/number format/1000 sep=}
This piece of code defines a complete style for the plot. With this style you may include several \addplot commands within this axis environment, they will fit and look nice together with no further tweaks (the ybar parameter described below is mandatory for this to work).
enlargelimits=0.05.
Enlarging the limits in a bar plot is necessary because these kind of plots often require some extra space above the bar to look better and/or add a label. Then number 0.05 is relative to the total height of of the plot.
legend style={at={(0.5,-0.2)}, anchor=north,legend columns=-1}
Again, this will work just fine most of the time. If anything, change the value of -0.2 to locate the legend closer/farther from the x-axis.
ybar interval=0.7,
Thickness of each bar. 1 meaning the bars will be one next to the other with no gaps and 0 meaning there will be no bars, but only vertical lines.

The coordinates in this kind of plot determine the base point of the bar and its height.

The labels on the y-axis will show up to 4 digits. If in the numbers you are working with are greater than 9999 pgfplot will use the same notation as in the example.

  Open an example of the pgfplots package in ShareLaTeX

[edit] 3D Plots

pgfplots has the 3d Plotting capabilities that you may expect in a plotting software.

[edit] Plotting mathematical expressions

There's a simple example about this at the introduction, let's work on something slightly more complex:

\begin{tikzpicture}
\begin{axis}[
    title=Exmple using the mesh parameter,
    hide axis,
    colormap/cool,
]
\addplot3[
    mesh,
    samples=50,
    domain=-8:8,
]
{sin(deg(sqrt(x^2+y^2)))/sqrt(x^2+y^2)};
\addlegendentry{$\frac{sin(r)}{r}$}
\end{axis}
\end{tikzpicture}

Pgfplots3d1.png

Most of the commands here have already been explained, but there are 3 new things:

hide axis
This option in the axis environment is self descriptive, the axis won't be shown.
colormap/cool
Is the colour scheme to be used in the plot. Check the reference guide for more colour schemes.
mesh
This option is self-descriptive too, check also the surf parameter in the introductory example.

Note: When working with trigonometric functions pgfplots uses degrees as default units, if the angle is in radians (as in this example) you have to use de deg function to convert to degrees.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Contour plots

In pgfplots is possible to plot contour plots, but the data has have to be pre calculated by an external program. Let's see:

\begin{tikzpicture}
\begin{axis}
[
    title={Contour plot, view from top},
    view={0}{90}
]
\addplot3[
    contour gnuplot={levels={0.8, 0.4, 0.2, -0.2}}
]
{sin(deg(sqrt(x^2+y^2)))/sqrt(x^2+y^2)};
\end{axis}
\end{tikzpicture}

Pgfplot3d2.png

This is a plot of some contour lines for the same equation used in the previous section. The value of the title parameter is inside curly brackets because it contains a comma, so we use the grouping brackets to avoid any confusion with the other parameters passed to the \begin{axis} declaration. There are two new commands:

view={0}{90}
This changes the view of the plot. The parameter is passed to the axis environment, which means this can be used in any other type of 3d plot. The first value is a rotation, in degrees, around the z-axis; the second value is to rotate the view around the x-axis. In this example when we combine a 0° rotation around the z-axis and a 90° rotation around the x-axis we end up with a view of the plot from top.
contour gnuplot={levels={0.8, 0.4, 0.2, -0.2}}
This line of code does two things: First, tells LaTeX to use the external software gnuplot to compute the contour lines; this works fine in ShareLaTeX but if you want to use this command in your local LaTeX installation you have to install gnuplot first (matlab will also work, in such case write matlab instead of gnuplot in the command). Second, the sub parameter levels is a list of values of elevation levels where the contour lines are to be computed.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Plotting a surface from data

To plot a set of data into a 3d surface all we need is the coordinates of each point. These coordinates could be an unordered set or, in this case, a matrix:

\begin{tikzpicture}
\begin{axis}
\addplot3[
    surf,
] 
coordinates {
(0,0,0) (0,1,0) (0,2,0)
 
(1,0,0) (1,1,0.6) (1,2,0.7)
 
(2,0,0) (2,1,0.7) (2,2,1.8)
};
\end{axis}
\end{tikzpicture}

Pgfplot3d3.png

The points passed to the coordinates parameter are treated as contained in a 3 x 3 matrix, being a white row space the separator of each matrix row.

All the options for 3d plots in this article apply to data surfaces.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Parametric plot

The syntax for parametric plots is slightly different. Let's see:

\begin{tikzpicture}
\begin{axis}
    [
    view={60}{30},
    ]
\addplot3[
    domain=0:5*pi,
    samples = 60,
    samples y=0,
]
({sin(deg(x))},
{cos(deg(x))},
{x});
\end{axis}
\end{tikzpicture}

Pgfplots3d4.png

There are only two new things in this example: first, the samples y=0 to prevent pgfplots from joining the extreme points of the spiral and; second, the way the function to plot is passed to the addplot3 environment. Each parameter function is grouped inside curly brackets and the three parameters are delimited with parenthesis.

  Open an example of the pgfplots package in ShareLaTeX

[edit] Reference guide

Command/Option/Environment Description Possible Values
axis Normal plots with linear scaling
semilogxaxis logaritmic scaling of x and normal scaling for y
semilogyaxis logaritmic scaling for y and normal scaling for x
loglogaxis logaritmic scaling for the x and y axes
axis lines changes the way the axes are drawn. default is 'box box, left, middle, center, right, none
legend pos position of the legend box south west, south east, north west, north east, outer north east
mark type of marks used in data plotting. When a single-character is used, the character appearance is very similar to the actual mark. *, x , +, |, o, asterisk, star, 10-pointed star, oplus, oplus*, otimes, otimes*, square, square*, triangle, triangle*, diamond, halfdiamond*, halfsquare*, right*, left*, Mercedes star, Mercedes star flipped, halfcircle, halfcircle*, pentagon, pentagon*, cubes. (cubes only work on 3d plots).
colormap colour scheme to be used in a plot, can be personalized but there are some predefined colormaps hot, hot2, jet, blackwhite, bluered, cool, greenyellow, redyellow, violet.

[edit] Further reading

For more information see: